Boat Lift U.S. Lifts

Boat Lift U.S. Inc.®, boatlifts are made of stainless steel and 6061-T6 aluminum for uncompromised strength and durability. Boat Lift U.S.® is also the home of the no-weld boatlift, eliminating weak points in the boatlifts that they build.

Cradle boatlifts have become industry standards, available in 4-, 6-, and 8-piling design and are offered in flat-plate and Gearbox™ styles. The quality of these boatlifts shows throughout, with no-weld aluminum construction, enclosed motors either stainless or painted, all aluminum bearings, aluminum bunks and a machine-grooved cable winder to protect the drive shaft and wind the cable, cleanly, without overlap.

We can even put a Boat Lift U.S. boatlift in your boat house. We use many of the same features from our other boatlifts in the boat house to guarantee uncompromised quality for our full range of products.

We also specialize in Up-N-Over® Personal Watercraft (PWC) lifts that allow smaller crafts to be lifted completely out of the water then rotated over the dock for easier maintenance. These lifts feature heavy-duty stainless steel and aluminum construction, and we can accommodate both standard and custom designs.

4-Piling Cradle Boat Lift

One of our best selling products. Our four-piling boatlifts are among the most capable on the market. We include all of our hardy features into this boatlift, so you know that it is built to last. Features include all aluminum bunks, enclosed motors, all aluminum bushings, and our no-weld construction.

 

Top 10 Reasons to buy a Boat Lift, U.S. boatlift!

  1. No-WeldsStrength and Reliability!
  2. T6-6061 Aluminum Construction!
  3. Enclosed Motorsand   Certified!
  4. Machine-Grooved Aluminum Cable Winders!
  5. Aluminum Bushings with Grease Zerks!
  6. Premium Aluminum “No Float” Bunks!
  7. Reliable Gear-Plates or Gearbox™!

 

4-Piling Cradle Boat Lifts

Features of the 4-Piling Cradle Boat Lift include a stainless or painted steel motor, strong no-weld aluminum construction, aluminum bunks and all-aluminum bushings with grease fittings. The machine-grooved cable winder protects drive shaft and keeps cables winding without overlapping.

Capacities from 8k to 40k lb.

 

Specifications and Features

Every Boat Lift U.S. boatlift is equipped with these standard features:

Enclosed Motors  

  • Available in Stainless or Painted

6061-T6 Aluminum Construction

Machine Grooved Aluminum Cable Winder

  • Protects the drive shaft and winds the cable without overlap.

Aluminum Bunks

  • Without wood, nothing floats. There is also no carpet to replace.

No Weld Construction

  • Welds weaken structural aluminum, so why weld? None of our lifts are welded, so you  know they are strong.

Back Plates or Gearbox™

  • All very reliable.

Structural Aluminum Bearings

  • Not just attached to the top beams.

All Bearings offer Grease Fittings

  • Others use nylatron or other plastics, which can swell or break down in humid environments. We don’t. We use greased aluminum bearings. They won’t rust, they won’t break down, and they won’t swell.

Cradle Ends with Solid Extruded Sheave Enclosure

  • Not welded onto or into cradle I-beam.

 

Specifications for specific classes of lifts:

Material Specs for Boat Lift US Lifts (PDF)

Boat Lift 8,000# capacity
Top Beams 12′ 6″
Bottom Cradle 11′
Motor/Drive (2) 3/4 HP DRIVES @ 120-240V 13.77/6.61 amps Stainless Steel
Bunks 11′ Aluminum
Cables (4) 5/16″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 10,000# capacity
Top Beams 12′ 6″
Bottom Cradle 12′ 6″
Motor/Drive (2) 3/4 HP DRIVES @ 120-240V 13.77/6.61 amps Stainless Steel
Bunks 12′ Aluminum
Cables (4) 5/16″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 13,000# capacity
Top Beams 12′ 6″
Bottom Cradle 12′ 6″
Motor/Drive (2) 3/4 HP DRIVES @ 120-240V 13.77/6.61 amps Stainless Steel
Bunks 12′ Aluminum
Cables (4) 5/16″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 16,000# capacity (4 Piling)
Top Beams 12′6″
Bottom Cradle 14′
Motor/Drive (2) 1 HP DRIVES @ 240V 7.14 amps Stainless Steel Motors
Bunks 12′ Aluminum
Cables (4) 5/16″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 16,000# capacity (6 Piling)
Top Beams 15′
Bottom Cradle 16′
Motor/Drive (2) 1 HP DRIVES @ 240V 7.14 amp Stainless Steel Motors
Bunks 16′ Aluminum
Cables (4) 5/16″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 20,000# capacity
Top Beams 15′
Bottom Cradle 16′
Motor/Drive (2) 1 1/2 HP DRIVES @ 240V 8.71 amps Stainless Steel Motors
Bunks 16′ Heavy Duty Aluminum
Cables (4) 5/16″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 24,000# capacity
Top Beams 15′
Bottom Cradle 16′
Motor/Drive (2) 1 1/2 HP DRIVES @ 240V 8.71 amps Stainless Steel Motors
Bunks 16′ Heavy Duty Aluminum
Cables (4) 3/8″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 27,000# capacity
Top Beams 15′
Bottom Cradle 16′
Motor/Drive (2) 1 1/2 HP DRIVES @ 240V 6.71 amps Stainless Steel Motors
Bunks 16′ Heavy Duty Aluminum
Cables (4) 3/8″ SS × 31′; 7 × 19 SSAC cables, with grooved cable winders

 

Boat Lift 35,000# capacity
Twin Top Beams 6′
Bottom Cradle 18′
Motor/Drive (4) 1 HP DRIVES @ 240V 8.71 amps Stainless Steel Motors
Bunks 16′ Heavy Duty Aluminum
Cables (4) 3/8″ SS × 31′; 7 × 19 SSAC cables with grooved cable winders

 

Boat Lift 40,000# capacity
Twin Top Beams 6′
Bottom Cradle 18′
Motor/Drive (4) 1 1/2 HP DRIVES @ 240V 8.71 amps Stainless Steel Motors
Bunks 4 x 7′ Heavy Duty Aluminum
Cables (4) 3/8″ SS × 31′; 7 × 19 SSAC cables with grooved cable winders